Ledger & adjustments · Guide 39 of 53
Project time, billables and WIP
Set task rates, record time and costs, understand WIP and profitability, then create traceable draft project invoices.
Time and billing extends the ordinary project tag into an operational job workspace. It helps you price work, capture effort and recover costs without pretending that a timesheet is accounting. Nothing posts until a project invoice is reviewed and issued through the normal sales workflow.
Enable it only when you need it
Go to Settings → Features and enable Time, billables & WIP. The Projects page gains Open, Time overview and Team setup controls. Turning it off removes those controls and requests, but retains all projects, source links, invoices and history.
Set up people and tasks
Team setup stores a private hourly cost and a default customer rate for each person. Open a project, assign its team, then add tasks:
- Hourly bills recorded minutes at the task rate, falling back to the person’s default.
- Fixed price charges the agreed task amount once; recorded time measures delivery cost, not the invoice.
- Non-chargeable records internal effort without adding WIP.
Rates are copied onto each time entry when saved. A later pay or pricing change therefore cannot rewrite historic project margin. Tasks can be edited (a rate change applies only to new entries) or archived once finished — archived tasks keep their history but stop accepting new time.
Record time and see actual costs
Time belongs to a date, person, task and a duration in minutes. Unbilled entries can be edited, copied, written off or deleted; write off removes billable time from WIP while retaining the record, and a written-off entry can be restored to WIP if the decision changes. Invoiced hourly time is locked to its invoice.
When a posted supplier bill, approved expense or other expense journal line carries the project tag, IQ Books brings it into Costs → From the books automatically. It starts as Not recovered: choose Billing treatment before passing it to the customer, and add a markup only when your agreement permits it. The posted amount remains controlled by its original accounting document. If that source is reversed, the project keeps a visibly reversed history and removes it from WIP.
Use the manual cost form for estimates and genuinely off-book actuals only. Estimates support pricing but never turn into accounting actuals by themselves. Invoiced hourly time and costs are locked because the customer document depends on them. Fixed-price time stays correctable after invoicing because it did not set the charge.
The timer
On a project’s Time tab, choose the task and press Start timer (or ask RiQ: “start a timer on the Harbour project, design”). The timer shows in the top bar on every screen and on the dashboard, in whichever books you are looking at, with a Stop button. Stopping saves your time on that task as an ordinary entry in whole minutes, with the same rates and checks as one you type; a timer still running past midnight becomes one entry for each day. Under a minute saves nothing. If you were taken off the project’s team while it ran, your time still saves.
Each person has one timer at a time: starting another asks first and saves the running one (one running in other books is stopped and saved there first). A timer that ran more than 10 hours (left on overnight, usually) is not saved until you say it is right or type the hours you really worked; after 7 days only the hours you type can be saved. Discard on the Time tab stops it without saving anything. If the time can no longer be saved (the project was completed or archived, or the task archived), stopping says why and offers to discard it. To use the timer you need a staff record in those books; an owner or admin adds people under Team setup.
What WIP means here
Operational WIP is uninvoiced hourly time at its captured billable rate, uninvoiced actual costs after markup, and fixed-price tasks not yet billed (the whole price once the task is complete, otherwise the share of its estimate logged so far, and only while the task has billable time still unbilled). Work on a draft invoice still counts until the draft is issued. WIP is shown net of anything billed on account, that is a progress invoice or an invoice tagged to the project by hand, which did not bill particular time or costs. It is a billing queue, not a balance-sheet asset journal. Estimated costs, non-chargeable work, written-off work and already invoiced sources are excluded.
Quote and invoice the work
The Invoice tab can create a quote from priced task estimates and estimated costs. Quotes remain outside the ledger, default to 30 days’ validity, and preserve their project tags when converted to a draft invoice.
Invoices can contain selected time and recoverable costs, a progress amount, or a deposit. IQ Books creates an ordinary draft customer document with project-tagged lines and exact links to its sources. The revenue category and VAT start where the project’s last issued invoice left them (so a reverse-charge customer stays reverse charge), otherwise on the customer’s usual VAT treatment (Edit customer → Coding defaults), otherwise standard rate if the business is VAT registered and no VAT if it is not; only treatments the business can charge on that date are offered. Review VAT, wording and due date under Customers, then issue it. The draft can be edited like any other (date, prices, discounts, VAT, lines added); the line that bills the work stays on it, so to take that work off, delete the draft. Time with no price (no rate on the task or the person, or a fixed-price task with none) is listed unticked: give the task or the person a rate (unbilled time already logged with no rate takes it) or the fixed task a price, or write the time off. Invoices are in the business’s own currency, which the rates are in. Draft creation does not recognise revenue; issue uses the established accounts-receivable and VAT engine.
Invoices drafted for you
At the start of each month What RiQ found drafts an invoice for each project with billable work not yet invoiced up to the end of the month before: hourly time at its rates, fixed-price tasks once they are complete (their price, once), and recoverable costs with their markup. It is an ordinary draft for the project’s customer, on the income account and VAT treatment of the project’s last issued invoice (so a reverse-charge customer stays reverse charge): nothing is sent or posted until you review, edit if needed, and issue it. Deleting the draft puts the work back to unbilled; it then goes on the next month’s draft (a deleted final draft is not made again). Work with no price is left out and named. It appears under Done for you with a link to the draft.
Choose how each project bills under Projects → Edit: Monthly (the default), On completion (once the project is marked completed, everything left), or Off (you invoice it yourself). A minimum keeps small monthly amounts waiting; blank uses the one under Settings → Automation (£50 unless changed). When a project is completed, its final draft bills whatever is left, however small. To have RiQ ask before drafting, set Unbilled time drafted into invoices to ask first there. A project needs a customer to be invoiced. A completed project can still be invoiced for what is left.
RiQ leaves two kinds of project to you: one billed another way (it has an issued progress invoice, or an invoice tagged to it by hand, neither of which marks its time as billed, so drafting it would bill the work twice), and one completed before RiQ began drafting invoices. Their unbilled work still shows as WIP.
Deposits and corrections
A deposit invoice uses the protected Customer deposits held liability, not revenue. After receipt, apply only the amount actually paid to another open invoice for the same project and customer. IQ Books creates and allocates a linked credit note, so the customer balance, VAT and deposit liability remain auditable. Reverse the application from the project if it was made in error.
Voiding or deleting a project invoice releases its linked time, costs and fixed-price task back to WIP. An invoice with an active deposit application cannot be voided until that application is reversed. These safeguards also cover double-clicks and simultaneous billing requests.
Profitability and privacy
Owner, admin, accountant and bookkeeper can see staff cost, project cost and profit. Other linked users may record their own time without seeing private rates or margin. The time overview reports total and chargeable effort across projects; each project shows invoiced revenue, cost-to-date and remaining WIP.
Workspace lists are bounded for predictable performance. If a project exceeds the visible limit, IQ Books says how many records exist and directs you to the full report; team reports accept at most a 366-day range.
When a project or a task runs over
What RiQ found watches the work for you. Project over budget says when a project’s cost to date reaches 80% of its budget and again once it passes it. Task over its estimate says when the time logged on an open task passes its estimate, with how far over and how many people logged it; it asks again only if the estimate changes or the task reaches twice it. Raise the estimate if the work has grown, or mark the task complete when it is done. Both show on the project’s workspace as well as in the list, and both thresholds can be changed under Settings → Automation.
Because these notices count staff cost rates and everyone’s time, they are shown only to the people who see those: owners, admins, accountants, bookkeepers and a practice working on the books. Other members do not see them on the dashboard, in the list, on their phone or through a connected assistant.