Skip to the guide
IQ Booksby ReconcileIQ

Ledger & adjustments · Guide 36 of 53

Fixed assets and monthly depreciation

Capitalise an asset, set its depreciation method, and IQ Books posts the monthly journals automatically. Disposal handles the gain or loss on sale. The asset register is the lighter touch on what would otherwise be a manual chore.

Equipment, furniture, vehicles, software with multi-year value: capital purchases that are too significant to expense in one go. The Fixed Assets module turns each one into a tracked asset with its own depreciation schedule, posted automatically each month.

Where to find it

Accounting → Fixed assets shows the asset register: every capitalised item with original cost, accumulated depreciation, current net book value, and status (in use, disposed, fully depreciated).

Adding an asset

  1. Click New asset.
  2. Enter description (“MacBook Pro 16” 2025”), category (Office equipment, Vehicles, IT & software, etc.), and original cost in your base currency.
  3. Pick the date of acquisition and the date it was placed into service (often the same day, occasionally different — e.g. a delivery date vs. first use).
  4. Set the depreciation method:
    • Straight-line: divide the cost evenly across the useful life. Most common.
    • Reducing balance: a fixed percentage of remaining book value each year. Tax-aligned for some asset classes.
    • Units of production: rare; depreciation tied to usage hours. Available for vehicles and machinery.
  5. Set the useful life (years) and the residual value (what you expect to sell it for at end of life, typically zero).
  6. Save. The asset is now tracked. The first depreciation entry will post on the next monthly cron sweep.

RiQ finds assets in your spending

What RiQ found looks through the bills and bank payments in the open period for things that belong here:

  • Equipment posted as an expense. A line of £1,000 or more net (change it under Settings → Automation) on an overhead expense account, whose wording or supplier says a computer, office equipment, furniture, a vehicle or machinery. Accepting posts a journal moving the cost to the asset account (dated as the purchase) and adds it to the register, so it is depreciated rather than written off at once. It asks first.
  • Spend already on an asset account with no register entry. Accepting adds the register entry. The cost is already there, so that posts nothing itself, but the next depreciation run charges depreciation from the purchase date, catching up the months since. It asks first for that reason.

The method and life follow your own register for that account where you have assets on it; otherwise a common default (computers 3 years, office equipment, furniture and machinery 5 years straight line, vehicles 25% reducing balance). You can change both on the asset afterwards. Never suggested: repairs, hire, leases, subscriptions, software and running costs; anything on a cost of sales, materials or subcontractor account (bought for resale or for a job); and a supplier you buy from six times or more a year on that account (a regular trade supplier). The account’s name alone never makes a line an asset. A purchase already on the register, or once on it and archived, is left alone, even after its bill is edited. The asset records the VAT reclaimed on its own line of the bill. To undo a capitalisation, reverse its journal from View transactions and archive the asset.

While an asset made from a bill line is live, that bill cannot be voided and that line’s account and amount cannot change: archive or dispose of the asset, and reverse its capitalisation journal, first.

What happens at acquisition

When you acquire an asset (typically by paying for it through a bill), the accounting picture is:

  • Bill side: debit Equipment (or whatever fixed-asset category) instead of an expense category.
  • Bank side: credit Bank when paid.

If you’ve already coded the bill to an expense category by mistake, post a manual journal to reclassify: debit Equipment, credit the expense category. Then add the asset to the register with the same original cost.

Monthly depreciation cron

Once an hour, IQ Books runs a server-side sweep across every asset. For each asset due a depreciation entry (i.e. its last entry was last month), it posts a balanced journal:

  • Debit Depreciation expense (P&L)
  • Credit Accumulated depreciation (balance sheet, contra-asset)
  • source_reference = depreciation:assetN:YYYY-MM-DD

The amount posted is the standard period charge for the chosen method. The hourly cron is just a check; the actual cadence of posting is monthly.

A month inside a locked period is charged with the others in one journal on the first day after the lock, as it is for an asset added after a lock and when an asset is disposed of, and the first month after a lock that ends mid-month (5 April, say) is charged as usual. A period can be locked up to today, not after it; under a lock that already runs past today, those months wait until it has passed, so nothing is dated in the future. On a sole trader’s or landlord’s books the charge goes to an account HMRC never receives, such as Depreciation: depreciation is never allowable for tax, and capital allowances on Reports → Tax year-end take its place. The register still posts each month into a year already sent to HMRC, which changes nothing HMRC holds.

Reading the asset register

The register shows, for each asset:

  • Original cost — what you paid (or were billed). Doesn’t change after capitalisation.
  • Accumulated depreciation — sum of all depreciation entries posted so far.
  • Net book value — original cost minus accumulated depreciation. The figure that appears on your balance sheet.
  • Annual charge — what your P&L will see this year if no acquisition or disposal happens.
  • Status — In use / Fully depreciated / Disposed.

Disposal

When you sell, scrap or otherwise stop using an asset, dispose of it from the register:

  1. Click Dispose on the asset detail page.
  2. Enter disposal date and proceeds (the cash you received, if any).
  3. IQ Books computes the gain or loss: proceeds minus net book value, where positive is a gain (credit) and negative is a loss (debit).
  4. Confirm. A balanced disposal journal posts:
    • Credit Equipment (writes off the asset cost)
    • Debit Accumulated depreciation (writes off the accumulated charge)
    • Debit/credit Bank for proceeds (if any)
    • Debit/credit Gain or loss on disposal of fixed assets (P&L)

The asset moves to “Disposed” status. No further depreciation entries post for it.

Edge cases

  • Asset becomes worthless before end of life. Dispose with proceeds = 0. The full remaining net book value posts as a loss on disposal.
  • Asset is sold for more than its book value. Common for vehicles. The gain on disposal posts as P&L income.
  • Asset is fully depreciated and still in use. Stays on the register at zero net book value, status “Fully depreciated”. No more journals post but the asset shows historical existence on the register.
  • Asset is split or partially disposed. Not directly supported. The pattern: dispose the original asset, capitalise a new one for any retained portion. Document the rationale in the new asset’s description.

Related guides

Choosing Between Straight-Line and Reducing-Balance

IQ Books offers two depreciation methods, and the one you pick changes the shape of the charge over the asset’s life. Both need a cost and a salvage value (what you expect the asset to be worth at the end — it must be less than the cost, and is often zero). What differs is how you describe the pace.

  • Straight-line spreads the cost evenly. You enter the useful life in months. Best for assets that lose value steadily — furniture, fit-out, most office equipment.
  • Reducing-balance charges a fixed annual rate (a percentage between 0 and 100) against the falling net book value, so the charge is largest in the early months and tapers off. Best for assets that lose most of their value up front — vehicles, computers — and it aligns better with how some asset classes are treated for tax.

Worked example — straight-line. A van costs £24,000 with a £6,000 salvage value over a 60-month life. IQ Books depreciates the £18,000 difference evenly: £300 a month, £3,600 a year. After two years the accumulated depreciation is £7,200 and the net book value on your balance sheet is £16,800.

Worked example — reducing-balance. The same £24,000 van at a 25% annual rate loses roughly £6,000 in the first year, but that charge is applied to a shrinking balance month by month, so each month’s figure is a little smaller than the last. The depreciation never takes the asset below its £6,000 salvage value — once it reaches that floor, it stops.

The method, the life or rate, and the salvage value are all set when you add the asset. As you will see below, they become fixed once the first depreciation posts, so it is worth deciding deliberately at the outset rather than planning to tune it later.

Manual Versus Bank Funding

When you add an asset, IQ Books asks how the purchase should be funded. This single choice decides whether the module posts the acquisition for you, and getting it wrong is the most common cause of a fixed-asset figure that looks double.

  1. Choose “manual” when the cost is already on your books. If you recorded the purchase as a supplier bill, a bank payment, or an opening balance that already lands in the fixed-asset account, the value is present. Manual funding (the default) simply registers the asset for depreciation and posts nothing for the acquisition — because posting again would count the cost twice.
  2. Choose “bank” only when the cost is not yet recorded anywhere. Bank funding posts the acquisition for you, moving the cost out of the bank or cash account you nominate and into the fixed-asset account. Use it when you are capitalising something you have not otherwise entered.

The tell-tale of picking the wrong one is the fixed-asset total on your balance sheet showing twice what you paid, or a net fixed-asset figure that turns negative as depreciation eats into a cost that was never really there. If that happens, the fix is a single manual adjustment to remove the duplicate side — the depreciation schedule itself is unaffected.

Whichever you pick, the asset always needs its three accounts nominated: the fixed-asset account that holds the cost, the accumulated-depreciation account that gathers the wear, and the depreciation-expense account that takes the monthly charge to your profit & loss. All three must belong to the organisation.

Running Depreciation On Demand, and the Catch-Up Journal

You do not have to wait for the automatic monthly run. IQ Books schedules the first charge for the end of the purchase month and posts one every month after that, but a Depreciate now action on the asset lets you bring the schedule right up to date whenever you need the figures to be current — for example just before running a report or closing a period.

Running it is always safe. Every month’s depreciation is logged as it is posted, so triggering the run again never double-charges a month that has already been done; it only fills in the months that are missing.

There is one behaviour worth understanding when you capitalise an asset whose purchase date sits before a locked period — a common situation just after migrating your books. IQ Books cannot post into closed months, so instead of scattering entries across periods you have already finalised, it collapses all of that locked-window depreciation into a single catch-up journal dated the day after the lock. The cumulative depreciation is still correct; it simply arrives in one dated entry that respects your closed periods rather than reopening them.

Worked Disposal Examples

When you sell or scrap an asset, IQ Books first brings its depreciation up to date — it catches up to the month before the disposal, and the disposal month itself is not depreciated. It then works out the gain or loss against the net book value at that point. Two rules govern what you must supply:

  • A deposit account (the bank or cash account the money landed in) is required whenever proceeds are more than zero.
  • A gain or loss account is required whenever the proceeds do not exactly equal the net book value.

Take the straight-line van again: cost £24,000, and by the disposal date the catch-up has brought accumulated depreciation to £7,200, so the net book value is £16,800.

  • Sold at a profit. You sell it for £18,000. The £18,000 lands in your nominated bank account, the £24,000 cost and £7,200 accumulated depreciation are cleared out, and the £1,200 above net book value is booked as a gain to your gain/loss account.
  • Sold at a loss. You sell it for £15,000. Same close-out of cost and accumulated depreciation, £15,000 to the bank, and the £1,800 shortfall against the £16,800 book value is booked as a loss.
  • Scrapped for nothing. Proceeds are £0, so no deposit account is needed. The whole £16,800 remaining net book value is written off as a loss on disposal.

After disposal the asset is closed out and stops depreciating. As with everything in IQ Books, none of these entries overwrite anything — the depreciation history and the disposal journal all stay on the record.

Editing an Asset, and Common Questions

Which fields can I change later? Before any depreciation has posted, everything is editable. Once the first monthly charge has gone through, the numbers that drive the schedule — cost, salvage value, method, useful life, annual rate and the three accounts — are locked, and IQ Books will refuse to change them. The name and description stay editable at any time. To genuinely re-base an asset’s figures after depreciation has started, archive it and add a fresh asset with the corrected details, or post a manual adjustment for a one-off correction.

Do I put the VAT on the asset? No. VAT is handled on the original purchase — the bill or bank line you recorded the buy against — not on the asset record. Capitalise the asset at its cost so that only the capital value depreciates.

My asset stopped depreciating before reaching zero. That is expected. Depreciation never runs an asset below its salvage value, so if you set a salvage figure the net book value settles there and holds. A straight-line asset with zero salvage will run down to nil and then show as fully depreciated.

Can IQ Books revalue or impair an asset? Not automatically — only the two methods above are built, and there is no revaluation or impairment engine. If you need to write an asset up or down outside the normal schedule, treat it as an exceptional event and post a manual adjustment, documenting the reason.

IQ Books by ReconcileIQ

Your books, kept by themselves.

IQ Books is the AI-native UK ledger that does the bookkeeping for you. Bank transactions arrive coded, receipts and bills file themselves from a photo or an email, and the books are reconciled to the statement. RiQ does it, you sign it off. The ledger is free.